|
|
|
W o o d
|
-
Exposed parts are solid
4/4 and 8/4 maple and maple veneers.
-
All veneers are hand
selected for uniformity of color and graining.
-
Interior parts are
selected hardwoods of either alder or poplar.
-
Moldings are solid maple.
|
Moisture
Content
|
|
Case and
Top Surfaces
|
-
Horizontal grade high
pressure laminate used on all working horizontal surfaces.
-
The high pressure laminate
is pressed on a ¾" – 45 lb. industrial grade particle board with
a phenolic equalizing backer sheet.
|
Drawer
Construction
|
-
"5" panel
drawer construction.
-
It is constructed using 2
drawer sides, one front and the back and drawer bottoms.
-
The drawer front becomes the
5th panel which can be removed and replaced in the
event of damage.
-
All drawer sides, fronts, and
backs use a ½" – 9 ply Baltic birch veneer with a ¼"
Evanite hardwood drawer bottom, available in beige or almond.
-
We use side mounted heavy duty
enamel coated drawer glides rated at 75 lb. capacity.
-
These side glides captivate
the bottom edge of the drawer box transferring all the weight of the
drawer and contents to the glides thus eliminating any possible bottom
failure.
-
A metal reinforcement bracket
is added to the center of each drawer bottom.
|
|
Case Construction
|
-
Cases are constructed using a
32 mm European system.
-
This system inserts a glue
dowel every 64 mm or 2-1/2".
-
All cases utilize a moisture
barrier composition back panel.
-
All cases have a moisture
barrier on bottom of side panels.
-
All panels utilized in case
construction have a 45 lb. high density particleboard core.
|
|
Hardware
|
|
|
Finishes
|
|
